ZY4000 13 28 Shield Roof Support

01 | KEY TECHNICAL ATTRIBUTES

1. Product: ZY4000 13 28 Shield Roof Support

2. Sourcing brand: TAIDA GLOBAL (procurement coordination platform; not a claim to be the equipment manufacturer or an authorized brand agent).

3. Category: Hydraulic Roof Supports

4. Typical application: higher-resistance support for medium-thin seams.

5. Support height: 1.3–2.8 m.

6. Rated working resistance: 4000 kN.

7. Functional configuration: front canopy load sharing and hydraulic legs.

8. Critical technical interfaces and compatibility: canopy and shield alignment, hydraulic leg capacity, floor bearing pressure and shearer/AFC interfaces.

9. Factory inspection / FAT / SAT focus: hydrostatic pressure testing, functional movement, structural welds and interlocks.

10. Site safety: Confirm strata conditions and integrated longwall equipment compatibility; obtain mine-specific approvals.

11. Utilities and controls: confirm actual operating voltage/frequency, hydraulic fluid, connectors and protocols; do not assume 380 V/50 Hz.

12. Request a current manufacturer datasheet, drawings, material and test records, relevant certificates and agreed FAT/SAT checklist.

13. Specification status: Values are drawn from third-party model references; the cited source is not proof that TAIDA GLOBAL sells, stocks or represents this model.

14. Manufacturer and country of origin: not verified; do not infer them from the third-party reference site.

02 | REGIONAL SHIPMENT & DELIVERY GUIDANCE

1. Production lead time: unconfirmed until a manufacturer supplies a written production schedule; include design, material procurement, fabrication, tests, inspection and packing.

2. Shipment: ZY4000 13 28 Shield Roof Support. Confirm actual packed dimensions, per-piece gross weight, split modules, handling, hydraulic fluid, battery and hazardous-goods rules.

3. Historic ordinary sea-freight ETD-to-ETA reference ONLY (from an older crane template; NOT verified 2026 sailings or equipment-specific quotes):

  • Southeast Asia: Shanghai → Surabaya, Indonesia; indicative 12–20 days.

  • East Asia: Shanghai → Incheon, South Korea; indicative 3–8 days.

  • Middle East: Shanghai → Khalifa Port, UAE; indicative 18–28 days.

  • Africa: Shanghai → Tangier, Morocco; indicative 32–50 days.

  • Europe: Shanghai → Hamburg, Germany; indicative 36–53 days.

  • Americas: Shanghai → Vancouver, Canada; indicative 15–26 days.

4. These ranges must NOT be used for contractual delivery commitments or special/out-of-gauge cargo without fresh carrier quotations.

5. Inland transport in China, customs, export handling, loading, booking queues and origin-port time are excluded.

6. Breakbulk, open-top/flat-rack, oversized machinery, batteries and explosion-protected electronics may require different handling and transit.

7. Port discharge, import clearance, taxes, last-mile delivery, mine entry, installation, commissioning and SAT are excluded. Confirm Incoterms, route and schedule in writing.

03 | CUSTOM OPTIONS & PROCUREMENT HIGHLIGHTS

1. Define the application: higher-resistance support for medium-thin seams. Confirm site operating loads, interfaces and local requirements before requesting a configuration.

2. Primary selection criterion: Support height: 1.3–2.8 m; verify engineering calculations and applicable test conditions.

3. Secondary selection criterion: Rated working resistance: 4000 kN; match component capacities, materials and safety margins.

4. Core functional focus: front canopy load sharing and hydraulic legs; identify which parts are standard versus optional/custom supply.

5. Interface and replacement requirements: canopy and shield alignment, hydraulic leg capacity, floor bearing pressure and shearer/AFC interfaces. For a replacement part, supply OEM model, part number, drawings, mounting dimensions and site photos.

6. Pre-quote technical comparison should explicitly address hydrostatic pressure testing, functional movement, structural welds and interlocks; document deviations to avoid rework and mismatched interfaces.

7. Optional scope (subject to quotation): equipment/components, connection pieces, inspection records, spare parts, commissioning assistance and operator training.

8. Evaluate total cost of procurement: equipment, spares, consumables, inspection/compliance, packing, insurance, freight, installation, energy use and downtime. No unverified cost-saving percentage is claimed.

9. Engineering safeguard: Confirm strata conditions and integrated longwall equipment compatibility; obtain mine-specific approvals.

04 | FREQUENTLY ASKED QUESTIONS

Q1. Is ZY4000 13 28 Shield Roof Support suitable for higher-resistance support for medium-thin seams?

A1. Check support height: 1.3–2.8 m and rated working resistance: 4000 kn, then assess canopy and shield alignment, hydraulic leg capacity, floor bearing pressure and shearer/AFC interfaces against the real mine or plant duty. A product name alone does not establish suitability.

Q2. Are the listed figures for ZY4000 13 28 Shield Roof Support guaranteed specifications or stock availability?

A2. No. Values are drawn from third-party model references; the cited source is not proof that TAIDA GLOBAL sells, stocks or represents this model. Request written supplier confirmation, latest approved drawings, performance guarantees and manufacturing schedule.

Q3. What should be reviewed during supplier audits, FAT and SAT for ZY4000 13 28 Shield Roof Support?

A3. Review hydrostatic pressure testing, functional movement, structural welds and interlocks; also verify records, identification, traceability, relevant approvals and site-specific acceptance criteria.

Q4. What information is needed to request a quote for ZY4000 13 28 Shield Roof Support?

A4. Provide the intended duty (higher-resistance support for medium-thin seams), required support height and rated working resistance, drawings, power/hydraulic interfaces, installation constraints, order quantity and destination country. Replacements need original equipment drawings.

Q5. Can the regional shipping intervals above be used as guaranteed delivery dates?

A5. No. They are historical ordinary-ocean-freight illustrations, not verified schedules. The manufacturer and forwarder must confirm actual packing, carrier, Incoterms, dates and any special-cargo restrictions in writing.