Coal Jigging Separator
01 | KEY TECHNICAL ATTRIBUTES
1. Product: Coal Jigging Separator
2. Sourcing brand: TAIDA GLOBAL (procurement coordination platform; not a claim to be the equipment manufacturer or an authorized brand agent).
3. Category: Coal Preparation & Mineral Processing
4. Typical application: gravity separation of lump coal and fine coal.
5. Separation method: Pulsating water.
6. Target throughput: 200 t/h.
7. Functional configuration: air-pulsed jigging separation.
8. Critical technical interfaces and compatibility: representative ore tests, feed particle size, separation objective, water and reagent demand.
9. Factory inspection / FAT / SAT focus: process trial results, material balances, separation and wear checks.
10. Site safety: Do not promise recovery or concentrate grades without a representative sample test.
11. Utilities and controls: confirm actual operating voltage/frequency, hydraulic fluid, connectors and protocols; do not assume 380 V/50 Hz.
12. Request a current manufacturer datasheet, drawings, material and test records, relevant certificates and agreed FAT/SAT checklist.
13. Specification status: These values are planning targets or illustrative procurement criteria, NOT a confirmed supplier specification or inventory claim.
14. Manufacturer and country of origin: not verified; do not infer them from the third-party reference site.
02 | REGIONAL SHIPMENT & DELIVERY GUIDANCE
1. Production lead time: unconfirmed until a manufacturer supplies a written production schedule; include design, material procurement, fabrication, tests, inspection and packing.
2. Shipment: Coal Jigging Separator. Confirm actual packed dimensions, per-piece gross weight, split modules, handling, hydraulic fluid, battery and hazardous-goods rules.
3. Historic ordinary sea-freight ETD-to-ETA reference ONLY (from an older crane template; NOT verified 2026 sailings or equipment-specific quotes):
• Southeast Asia: Shanghai → Surabaya, Indonesia; indicative 12–20 days.
• East Asia: Shanghai → Incheon, South Korea; indicative 3–8 days.
• Middle East: Shanghai → Khalifa Port, UAE; indicative 18–28 days.
• Africa: Shanghai → Tangier, Morocco; indicative 32–50 days.
• Europe: Shanghai → Hamburg, Germany; indicative 36–53 days.
• Americas: Shanghai → Vancouver, Canada; indicative 15–26 days.
4. These ranges must NOT be used for contractual delivery commitments or special/out-of-gauge cargo without fresh carrier quotations.
5. Inland transport in China, customs, export handling, loading, booking queues and origin-port time are excluded.
6. Breakbulk, open-top/flat-rack, oversized machinery, batteries and explosion-protected electronics may require different handling and transit.
7. Port discharge, import clearance, taxes, last-mile delivery, mine entry, installation, commissioning and SAT are excluded. Confirm Incoterms, route and schedule in writing.
03 | CUSTOM OPTIONS & PROCUREMENT HIGHLIGHTS
1. Define the application: gravity separation of lump coal and fine coal. Confirm site operating loads, interfaces and local requirements before requesting a configuration.
2. Primary selection criterion: Separation method: Pulsating water; verify engineering calculations and applicable test conditions.
3. Secondary selection criterion: Target throughput: 200 t/h; match component capacities, materials and safety margins.
4. Core functional focus: air-pulsed jigging separation; identify which parts are standard versus optional/custom supply.
5. Interface and replacement requirements: representative ore tests, feed particle size, separation objective, water and reagent demand. For a replacement part, supply OEM model, part number, drawings, mounting dimensions and site photos.
6. Pre-quote technical comparison should explicitly address process trial results, material balances, separation and wear checks; document deviations to avoid rework and mismatched interfaces.
7. Optional scope (subject to quotation): equipment/components, connection pieces, inspection records, spare parts, commissioning assistance and operator training.
8. Evaluate total cost of procurement: equipment, spares, consumables, inspection/compliance, packing, insurance, freight, installation, energy use and downtime. No unverified cost-saving percentage is claimed.
9. Engineering safeguard: Do not promise recovery or concentrate grades without a representative sample test.
04 | FREQUENTLY ASKED QUESTIONS
Q1. Is Coal Jigging Separator suitable for gravity separation of lump coal and fine coal?
A1. Check separation method: pulsating water and target throughput: 200 t/h, then assess representative ore tests, feed particle size, separation objective, water and reagent demand against the real mine or plant duty. A product name alone does not establish suitability.
Q2. Are the listed figures for Coal Jigging Separator guaranteed specifications or stock availability?
A2. No. These values are planning targets or illustrative procurement criteria, NOT a confirmed supplier specification or inventory claim. Request written supplier confirmation, latest approved drawings, performance guarantees and manufacturing schedule.
Q3. What should be reviewed during supplier audits, FAT and SAT for Coal Jigging Separator?
A3. Review process trial results, material balances, separation and wear checks; also verify records, identification, traceability, relevant approvals and site-specific acceptance criteria.
Q4. What information is needed to request a quote for Coal Jigging Separator?
A4. Provide the intended duty (gravity separation of lump coal and fine coal), required separation method and target throughput, drawings, power/hydraulic interfaces, installation constraints, order quantity and destination country. Replacements need original equipment drawings.
Q5. Can the regional shipping intervals above be used as guaranteed delivery dates?
A5. No. They are historical ordinary-ocean-freight illustrations, not verified schedules. The manufacturer and forwarder must confirm actual packing, carrier, Incoterms, dates and any special-cargo restrictions in writing.
