Two Product Dense Medium Cyclone

01 | KEY TECHNICAL ATTRIBUTES

1. Product: Two Product Dense Medium Cyclone

2. Sourcing brand: TAIDA GLOBAL (procurement coordination platform; not a claim to be the equipment manufacturer or an authorized brand agent).

3. Category: Coal Preparation & Mineral Processing

4. Typical application: two-product dense-medium separation of raw coal.

5. Separation products: 2 product streams.

6. Target cyclone diameter: 800 mm.

7. Functional configuration: two-product dense-medium cyclone circuit.

8. Critical technical interfaces and compatibility: representative ore tests, feed particle size, separation objective, water and reagent demand.

9. Factory inspection / FAT / SAT focus: process trial results, material balances, separation and wear checks.

10. Site safety: Do not promise recovery or concentrate grades without a representative sample test.

11. Utilities and controls: confirm actual operating voltage/frequency, hydraulic fluid, connectors and protocols; do not assume 380 V/50 Hz.

12. Request a current manufacturer datasheet, drawings, material and test records, relevant certificates and agreed FAT/SAT checklist.

13. Specification status: These values are planning targets or illustrative procurement criteria, NOT a confirmed supplier specification or inventory claim.

14. Manufacturer and country of origin: not verified; do not infer them from the third-party reference site.

02 | REGIONAL SHIPMENT & DELIVERY GUIDANCE

1. Production lead time: unconfirmed until a manufacturer supplies a written production schedule; include design, material procurement, fabrication, tests, inspection and packing.

2. Shipment: Two Product Dense Medium Cyclone. Confirm actual packed dimensions, per-piece gross weight, split modules, handling, hydraulic fluid, battery and hazardous-goods rules.

3. Historic ordinary sea-freight ETD-to-ETA reference ONLY (from an older crane template; NOT verified 2026 sailings or equipment-specific quotes):

  • Southeast Asia: Shanghai → Surabaya, Indonesia; indicative 12–20 days.

  • East Asia: Shanghai → Incheon, South Korea; indicative 3–8 days.

  • Middle East: Shanghai → Khalifa Port, UAE; indicative 18–28 days.

  • Africa: Shanghai → Tangier, Morocco; indicative 32–50 days.

  • Europe: Shanghai → Hamburg, Germany; indicative 36–53 days.

  • Americas: Shanghai → Vancouver, Canada; indicative 15–26 days.

4. These ranges must NOT be used for contractual delivery commitments or special/out-of-gauge cargo without fresh carrier quotations.

5. Inland transport in China, customs, export handling, loading, booking queues and origin-port time are excluded.

6. Breakbulk, open-top/flat-rack, oversized machinery, batteries and explosion-protected electronics may require different handling and transit.

7. Port discharge, import clearance, taxes, last-mile delivery, mine entry, installation, commissioning and SAT are excluded. Confirm Incoterms, route and schedule in writing.

03 | CUSTOM OPTIONS & PROCUREMENT HIGHLIGHTS

1. Define the application: two-product dense-medium separation of raw coal. Confirm site operating loads, interfaces and local requirements before requesting a configuration.

2. Primary selection criterion: Separation products: 2 product streams; verify engineering calculations and applicable test conditions.

3. Secondary selection criterion: Target cyclone diameter: 800 mm; match component capacities, materials and safety margins.

4. Core functional focus: two-product dense-medium cyclone circuit; identify which parts are standard versus optional/custom supply.

5. Interface and replacement requirements: representative ore tests, feed particle size, separation objective, water and reagent demand. For a replacement part, supply OEM model, part number, drawings, mounting dimensions and site photos.

6. Pre-quote technical comparison should explicitly address process trial results, material balances, separation and wear checks; document deviations to avoid rework and mismatched interfaces.

7. Optional scope (subject to quotation): equipment/components, connection pieces, inspection records, spare parts, commissioning assistance and operator training.

8. Evaluate total cost of procurement: equipment, spares, consumables, inspection/compliance, packing, insurance, freight, installation, energy use and downtime. No unverified cost-saving percentage is claimed.

9. Engineering safeguard: Do not promise recovery or concentrate grades without a representative sample test.

04 | FREQUENTLY ASKED QUESTIONS

Q1. Is Two Product Dense Medium Cyclone suitable for two-product dense-medium separation of raw coal?

A1. Check separation products: 2 product streams and target cyclone diameter: 800 mm, then assess representative ore tests, feed particle size, separation objective, water and reagent demand against the real mine or plant duty. A product name alone does not establish suitability.

Q2. Are the listed figures for Two Product Dense Medium Cyclone guaranteed specifications or stock availability?

A2. No. These values are planning targets or illustrative procurement criteria, NOT a confirmed supplier specification or inventory claim. Request written supplier confirmation, latest approved drawings, performance guarantees and manufacturing schedule.

Q3. What should be reviewed during supplier audits, FAT and SAT for Two Product Dense Medium Cyclone?

A3. Review process trial results, material balances, separation and wear checks; also verify records, identification, traceability, relevant approvals and site-specific acceptance criteria.

Q4. What information is needed to request a quote for Two Product Dense Medium Cyclone?

A4. Provide the intended duty (two-product dense-medium separation of raw coal), required separation products and target cyclone diameter, drawings, power/hydraulic interfaces, installation constraints, order quantity and destination country. Replacements need original equipment drawings.

Q5. Can the regional shipping intervals above be used as guaranteed delivery dates?

A5. No. They are historical ordinary-ocean-freight illustrations, not verified schedules. The manufacturer and forwarder must confirm actual packing, carrier, Incoterms, dates and any special-cargo restrictions in writing.